At Rocktech, we design and develop custom embedded systems that integrate TFT displays, touchscreen control, embedded SBCs, and Android/Linux-based BSPs into compact, high-performance solutions. Whether you're building a smart HMI panel, a production-ready embedded board, or a fully customized system software stack, our experienced engineering team delivers complete hardware and software integration—tailored to your unique product vision.
As an embedded product design and development partner, we take your project from requirement definition and electronic product design through schematic, PCB/PCBA, firmware and BSP, all the way to mass production — so you work with one team instead of coordinating several vendors.
Explore our full range of custom embedded system solutions, from board-level PCB design to UI frameworks and scalable manufacturing.
Our custom embedded system solutions include HMI panels that combine high-brightness TFT displays, responsive touchscreens, precision-crafted housings, and rich audio interfaces — including microphone and speaker — into compact, ready-to-integrate modules.
We also support sensor integration such as ambient light and proximity detection, providing enhanced user interaction and environmental adaptability.
We build custom embedded system platforms based on Rockchip (RK3566, PX30, RK3576) and Allwinner (A33, A83T) SoCs, offering a perfect balance between cost, power, and performance. Our board-level design services include SoC selection, PMIC configuration, power rail design, and full schematic/layout development tailored to your product needs.
Each custom SBC supports diverse interfaces such as UART, RS232, RS485, CAN, GPIO, LVDS/MIPI/eDP display, USB, SDIO, and Ethernet. We also integrate wireless modules like Wi-Fi, Bluetooth, ZigBee, and 4G. Our layout ensures EMI compliance, thermal efficiency, and optimal pinmux mapping for your enclosure and industrial environment.
These SBCs serve as the core hardware foundation for your custom embedded system, supporting both Android and Linux BSP development.
We provide custom Android BSP development for Rockchip (RK3566, RK3576, PX30) and Allwinner (A64, A83T, A33) SoCs. Our services include bootloader adaptation (U-Boot), kernel configuration, device tree tuning, and secure boot setup — all tailored to your specific hardware layout. These BSP services form the foundation of a scalable custom embedded system.
We customize the Android HAL layer and port drivers for touchscreens, audio, sensors, USB, UART, I2C, and SPI interfaces. Our team ensures precise hardware–software interaction, enabling fast-booting and stable systems. Whether you need touchscreen tuning, audio codec integration, or display driver enablement, we tailor everything for a seamless user experience.
We support projects ranging from industrial HMI panels to commercial Android devices, with full source-level control over the entire BSP stack. Whether you're building a touchscreen interface or a headless controller, our custom Android embedded system services help you bring it to production faster.
We provide custom Linux BSP development tailored for embedded ARM systems using Buildroot or Yocto. Our team supports U-Boot and Linux kernel configuration, device tree customization, patch integration, and secure bootloader setup. These services form the foundation of a scalable embedded Linux system aligned with your SBC hardware and application goals.
Our engineers fine-tune the root filesystem using BusyBox or systemd, and support driver porting for display, touch, I2C/SPI peripherals, Ethernet, GPIO, and audio codecs. We also enable lightweight UI frameworks such as Qt5 and LVGL for GUI-based terminals. For OTA support, we offer A/B partition configuration and fast boot implementation — essential for production-ready custom Linux embedded systems.
Whether you're building a headless industrial controller or a Linux-based HMI terminal, our Linux BSP customization services help reduce time-to-market while maintaining system flexibility and reliability.
We offer full-stack custom PCB design services, including schematic capture, multilayer layout routing, and controlled impedance stack-up tailored for embedded hardware. Our engineers use Altium Designer and other industry-standard EDA tools to ensure signal integrity, EMI/EMC compliance, thermal design, and manufacturing readiness. Whether you're developing a high-speed SBC or compact IoT module, we help ensure PCB performance aligns with system-level requirements.
Our PCBA services include both rapid prototyping and low- to mid-volume manufacturing. We handle BOM sourcing, SMT/DIP component placement, reflow/wave soldering, and in-circuit testing (ICT). From schematic to shipment, we deliver end-to-end PCBA solutions that accelerate your product validation and reduce time-to-market.
As part of our full custom embedded system service, we ensure every layer — from schematic and layout to final assembly — is optimized for your product vision.
From custom HMI panel integration to Linux and Android BSP customization, we turn ideas into finished products. Our solutions are built on a solid foundation of industrial-grade embedded SBCs, ensuring reliable performance and seamless hardware-software integration. Contact us to start your custom embedded system journey today.
